Tom's Guide | Tom's Hardware | Tom's Games
![]() |
![]() |
![]() |
can some one tell me how fast i could get my pc running???curently at 2.189
12.5x166..how much can i push it??? i have decent cooling.any help much appreciated

WHT CPU u usin?
AMD Athlon 3000+ 64bit OC-3400
Asus A8N-SLI MB
1GB DDR 32002X 512MB
2X SLI Asus 6600GT Cards
200GB SATA Hard Drive

Your CPU is a 2800+, not a 2.8...it's default settings are 12.5 x 166MHz (2.083GHz)
Since you only have DDR333, your overclock results will be limited. Make sure to lock your PCI/AGP at 33/66MHz, & have your RAM set to run at the same speed as the FSB...the setting may be SYNC or 100%. Make sure Spread Spectrum is disabled. Then start raising the FSB 5 MHz at a time, reboot after each change & test your system for stability...if all is well, add another 5MHz & try again. You'll probably max out somewhere about 185MHz due to your RAM...that would put your CPU speed at 2.31GHz
http://www.asrock.com/product/product_k7s8xe+.htm
ASUS A7N8X-X
Athlon XP 1800+
8.5 x 200MHz
1024MB PC3200 2.5-3-3-7
Asus A9550GE/TD 128MB
WinME/WinXP Pro SP2

thanks for reply.
1.there is no option to lock pci/agp
2.there was an option to change the multiplier ,its on 12.5x166..but this has gone ,it did go up to 24x buts its dissapeared
3.spread spectrum is dissabled
all ive been able to do is change from jumper to manual and up it to 175 which reads as a 3000 at 2187
also i changed the bios to 1.7
pls help

![]() |
What is the point of Dual...
|
emachine t6212
|

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.
| Ads by Google |