i am new to the overclocking game and would rathe appreciate alittle bit of guideance if possible. i have been able to find out some specs but if there are any more you need please ask... CPU Properties: CPU Type AMD Sempron, 2000 MHz (10 x 200) 3300+ CPU Alias Venice-128 S754 CPU Stepping DH-E6 Instruction Set x86, x86-64, MMX, 3DNow!, SSE, SSE2, SSE3 Min / Max CPU Multiplier 4x / 10x L1 Code Cache 64 KB (Parity) L1 Data Cache 64 KB (ECC) L2 Cache 128 KB (On-Die, ECC, Full-Speed) CPU Physical Info: Package Type 754 Pin uOPGA Package Size 4.00 cm x 4.00 cm Transistors 68.5 million Process Technology 11Mi, 90 nm, CMOS, Cu, SOI Die Size 84 mm2 Core Voltage 1.100 - 1.450 V I/O Voltage 1.2 V + 2.5 V Maximum Power 67.0 W SPD ---------------------- [ DIMM1: Infineon 64D64300HU5C ] Memory Module Properties: Module Name Infineon 64D64300HU5C Serial Number 040F7121h Manufacture Date Week 38 / 2006 Module Size 512 MB (1 rank, 4 banks) Module Type Unbuffered Memory Type DDR SDRAM Memory Speed PC3200 (200 MHz) Module Width 64 bit Module Voltage SSTL 2.5 Error Detection Method None Refresh Rate Reduced (7.8 us), Self-Refresh Memory Timings: @ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS) @ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS) @ 133 MHz 2.0-2-2-6 (CL-RCD-RP-RAS) Memory Module Features: Early RAS# Precharge Supported Auto-Precharge Not Supported Precharge All Not Supported Write1/Read Burst Not Supported Buffered Address/Control Inputs Not Supported Registered Address/Control Inputs Not Supported On-Card PLL (Clock) Not Supported Buffered DQMB Inputs Not Supported Registered DQMB Inputs Not Supported Differential Clock Input Supported Redundant Row Address Not Supported Memory Module Manufacturer: Company Name Infineon Technologies AG Product Information http://www.infineon.com/cgi-bin/ifx... [ DIMM2: Nanya M2U51264DS88B1G-5T ] Memory Module Properties: Module Name Nanya M2U51264DS88B1G-5T Serial Number 2E883424h Manufacture Date Week 24 / 2006 Module Size 512 MB (1 rank, 4 banks) Module Type Unbuffered Memory Type DDR SDRAM Memory Speed PC3200 (200 MHz) Module Width 64 bit Module Voltage SSTL 2.5 Error Detection Method None Refresh Rate Reduced (7.8 us), Self-Refresh Memory Timings: @ 200 MHz 3.0-3-3-8 (CL-RCD-RP-RAS) @ 166 MHz 2.5-3-3-7 (CL-RCD-RP-RAS) Memory Module Features: Early RAS# Precharge Not Supported Auto-Precharge Not Supported Precharge All Not Supported Write1/Read Burst Not Supported Buffered Address/Control Inputs Not Supported Registered Address/Control Inputs Not Supported On-Card PLL (Clock) Not Supported Buffered DQMB Inputs Not Supported Registered DQMB Inputs Not Supported Differential Clock Input Supported Redundant Row Address Not Supported Memory Module Manufacturer: Company Name Nanya Technology Corp. Product Information http://www.nanya.com/e-htm/abc/abc-... Motherboard Properties: Manufacturer WinFast Product 760GXK8MC Serial Number WY3F61601038 BIOS Properties: Vendor Phoenix Technologies, LTD Version 6.00 PG Release Date 10/08/2005 AGP Device SAPPHIRE Radeon X1550 Series [NoDB] and ive got 2 x 160GB HDD on IDE not Sata would idealy like to overclock to enable better gaming, experimentation and generaly to overclock it.

"would idealy like to overclock to enable better gaming" You really don't have a gaming system. Your board, CPU & video card are all low end/budget components. The CPU only has 128k L2 cache & boards based on SiS chipsets generally aren't known as great peformers. If you want better gaming, start by replacing the Radeon X1550...it's not a gaming card. If fact, many games specifically state, "Radeon X1550 is not supported". As for overclocking, I had a look at the BIOS chapter in the manual for the 760GXK8MC. It doesn't appear to have the necessary settings/options. You're out of luck unless you wanna try software overclocking. http://www.tomshardware.com/reviews... http://www.foxconnchannel.com/produ...