ok so here it goes im finally gonna overclock my 2500+ to a 3200+, i have an EPoX 8RDA3+ mobo, 512 PC3200 corsair ram, i know this sounds really noobish but yea.. what do i click again to get into the BIOS? n yea after i get into the BIOS what do i change? i know im gonna change the FSB.. but to what.. and do i change the voltage? and to what.. can someone tell me exactly what to change and by how much? thx loads AMD XP "Barton" 2500+ 512MB PC3200 GeForce FX5900 XT EPoX 8RDA3+ mobo 40GB Western Digital

Hi, Before your pc posts press the delete button.. then you should get into the bios.. Once your there go to your FSB settings and change it to 200FSB (should be 166fsb) ..also make sure your ram/cpu are running in sync (should be called "dram ratio") make sure it is set to 1:1 /3:3 or 6:6 which seems to be the most popular. once you have done that save your settings and let it re-boot. Most xp2500s seem to be ok by just changing the FSB but some need slightly higher Vcore if found unstable after testing...so if yours need it i would raise it to 1.7v .. (note : make sure your cpu cooler is up to the job..!!!) .................... Abit NF7s V2.0 Mobo Radeon 9800xt 256mb, AMD XP2500 Mobile CPU @2610ghz Antec true 550w psu, 2X512 xms corsair Pc3500 in dual channel, Twin 10k Raptors (raided) waterchill cooled..

There are many other BIOS settings that have to be tweaked besides FSB & vcore. Read your manual! Asus A7N8X-X 1800+ @8x210mhz 512mb PC3200 Ti4200/8X 128mb WDC 60GB

bah.. the manual.. i dont even know where to start reading! lol.. gah.. AMD XP "Barton" 2500+ 512MB PC3200 GeForce FX5900 XT EPoX 8RDA3+ mobo 40GB Western Digital