Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
o/c amd
Name: wildbilldub Date: December 6, 2003 at 11:55:49 Pacific OS: xp pro CPU/Ram: xp 1800/256
Comment:
i o/c my amd 1800 (1.5Ghz) k7vt2 mboard to 1.6 was running fine for weeks, now all of a sudden wont boot up no bios no nothing. If i try my cpu on another mboard and it is dead, will it damage the other board ?
Name: real_cool Date: December 6, 2003 at 18:53:38 Pacific
Reply:
I assume "all of a sudden wont boot up no bios no nothing", means the motherboard did not make any "beep" sound, the fans were not running, the monitor was black, the fan in the power supply was not turning....etc.
If you care to give more detail, perhaps other could help.
0
Response Number 2
Name: JosefBud Date: December 6, 2003 at 19:02:59 Pacific
Reply:
What's the point of overclocking it 0.1 GHz over anyway?
0
Response Number 3
Name: wildbilldub Date: December 7, 2003 at 05:31:40 Pacific
Reply:
the fans run, several more beeps than usual no power to monitor, floppy and cd power up, hard drive light comes on then goes then just fan running, then three more beeps. was trying to step up bit by bit as mboard has protection, a screensaver was running when a runtime error occured, no task manager not even soft boot, so restarted then this, but will i damage another mboard to see if its my cpu, ?
Summary: how low of a CPU can i get if i want 550mhz?? super socket 7 motherboard that supports 100mhz FSB and 5.5x multiplier; wish to use 550mhz of CPU speed. i am buying an AMD K6/K62/K62+ on eBay to use in...
Summary: Not necessarily a bad bios just an OLD one. I believe your setup is 2*66=132mhz but it has been awhile. First, you need to get familar with your mobo., any o/c'ing that you do is probally going to be ...
0 
