Could anyone advise if raising vcore voltages and/or memory volts would let you raise fsb any higher? I have nf7-s mb, xp3000 @400fsb wt 1gb dual pc3200 which is maxed out at 219 fsb and 2300mhz. Temps 38 idle/48load. Thanks

test your rig with prime95 first and then if its not running stable, increase the vcore, vcore can only add to the stability, it dodes not guarantee that you will reach the high fsb, it depends on the stepping and the processor limit

Thanks alot, I primed it at 1.675- error after 3 min, then gradually to 1.775- no errors after 15 min, This alone helped me bigtime cause ive only used toast to check things out in the past. My temps stayed the same also. Gonna start raising fsb and test some more. Even if i cant, the stability thing was worth more than a mhz increase. thanks again.

prime at least 12 hours

Abit AS8 LGA775 2.8 Prescott
512 Corsair XMS PC3200
128 meg Radeon 9800 Pro
DUAL 36 GIG WD Raptors
DUAL 21 in. ( 19.8 viewable ) Sony Trinitrons
3+ Mbps cable connection

Thanks,will do 12 hr prime. Does anyone know if dual channel limits your max fsb? ive read where it does and was wondering what this sites experts have to say. i know dual channel does close to nothing but if it is limiting me ill go to single.Thanks again.