Thanks jonoh. I never thought intel would come out with an oc utility for intel boards.

0

It is not an OC utility. It is merely a utility for system test. I am an official Intel reseller. Download it, overclock it and PLEASE post your result.

0

I wish was when I was right I could sound as confident as you do when you are wrong. http://www.xbitlabs.com/articles/editorial/display/idf-fall2003-3_10.html http://www.extremetech.com/article2/0,3973,1274183,00.asp It allows only up to a 4% overclock. Not much but better than nothing.

0

I admit wrong with no problem at all. The utlility is for memory, stress test purposes and not for overclocking. If you think a utility allows a 4% overclocking for stability check is an OC utlility, well I don't want say anymore. All P4 will FSB flunctiate 1-3 Mhz mind you. Every board would have this kind of variables in FSB. Intel does not call it OC utlility. You did.

0

When you AMD guys brag about 60% overclocking is a daily event, to recommend to an Intel guy a 4% fine tuning utlility an overclocking utility is an insult (the word insult learnt from some of you). Jay - switch to an Abit IC7 or Asus P4P800 you will get a minimum 3 ghz and over. The IS7 is also good and cheaper. This is an AMD forum with few Intel users.

0

"when I asked another Intel representative if Intel DCC utility was an indication of Intel’s changing attitude towards overclocking in general, I’ve got a more than definite answer: yes, it is an overclocking friendly utility" from xbitlabs link

0

Well Forum: I must say I didnt mean to cause any problems But I was reading the OC section of this site and there were Many different oppions I was using a Matsonic 9337c with a intel 2.4/533 and OC it through its OWN section in the BIOS JUST FOR OC you could OC The cpu, The memory,The Bus sped chek it out at matsonics site it's in pdf files... no joke! I was always told that AMD's were only good for serving up sunny side egg's.But I find this hard to belive with the New 64 bit hype when Intel foucuses on 32... Matter of opion What I wanted to KNow is if I can OC this board and prossesor thru the bios like the 9337c Mobo ? If not are there any Utilitys like the ones we all use for video cards do they have a radclocker for cpu's & mobo's?? lET'S ALL keep in mind we all learn something new everyday or try Everyone has a opion that is backed by experence (I hope) and this site is where I have learned alot about machines So lets all just get along......he-he **emails are welcome if you have tips that my help Thanks as Always Jbirde

0

When I went to the Intel conference, "overclock VERY friendly" with a big smile was exactly what you would receive. And I said "people are not stupid". The replied "you'll never know." If you believe it, that's the day Intel sells unlock multi processors again.

0

real cool I had the desktop command center on the disk that came with the mobo So I installed and OC the 4% and it did make a tiny difference I went to 824fsb & 330 on the memry So I ran the 3d2003 from mad grape & same thing a tiny diff on the sore card at first scores I had were as follows: Before:1374 / After : 1495 with video card @ 485.25 / 345.25 So I want to Sincerly thank you for your help on this problem ... Thnx Again Jbirde

0