How much VCORE on p4 1.6 read more
|
Original Message
|
Name: yure
Date: January 21, 2004 at 15:25:57 Pacific
Subject: How much VCORE on p4 1.6 read more
OS: XP
CPU/Ram: 1.6 / 1gb memory
|
Comment: Heya all ! Good day , i wanna just o/c my CPU it's now 1.6 GHz i can set to 18x100 or 20x100 it works but i wanna know for how much can i put up VCORE CPU VOLTAGE ? I use VIA p4xb-ra
1.6 p4 CPU
1gb ram
mx440
creative5.1 I'm looking forward to helpful answers.... Bye , Yure
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: Real_Cool
Date: January 21, 2004 at 16:50:47 Pacific
|
Reply: (edit)The 1.6A (512 cache)is considered one of the best in overclocking. Try not to exceed 1.775 volt. Every processor/setup is different. I don't see how you could change the multi like you described 18x100 and 20x100. You can ONLY increase FSB with fixed multi. Like 16x133, or 16x160.
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: yure
Date: January 21, 2004 at 23:50:06 Pacific
|
Reply: (edit)so 16x must always be 16 ? I can only set 100 x ---> .... oki , and will be ok if i set 1.6 V ?
and what to do if not work? my comp won't start? THX
Report Offensive Follow Up For Removal
|
|
Response Number 3
|
Name: Real_Cool
Date: January 22, 2004 at 00:04:58 Pacific
|
Reply: (edit)Make sure you have the 1.6A which is 400mhz FSB (4x100), and it is a 16x100 = 1600 mhz. The default voltage should be 1.5volt. It is safe to increase the FSB from 100 to 133 at stock voltage. If it won't boot or becomes unstable, increase the voltage by 0.025 increment. You only need to "play" with FSB, i.e. in between 100 - 166 (example).
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
