Tom's Guide | Tom's Hardware | Tom's Games
![]() |
![]() |
![]() |
Hey do you guys have a hacked bios for me
bios version A08
Thanks
Pentium 4 2,6 Ghz
Ram = 512 MB
Video card = ATI 9800 pro 128 mb

It sure would help if you listed the board make, model & revision
Asus A7N8X-X
2500+ Sempron @ 2100mhz
10.5 x 200mhz @ 1.80v
512mb PC3200
Ti4200/8X 128mb
WDC 60GB

Is this Enough?
CPU(s)
Number of CPUs 1
Code Name Klamath
Specification Intel Pentium II 266MHz
Family / Model / Stepping 6 3 4
Extended Family / Model 0 0
Package Slot 1 SECC
Core Stepping C1
Technology 0.35 ยต
Supported Instructions Sets MMX
CPU Clock Speed 266.7 MHz
Clock multiplier x 4.0
Front Side Bus Frequency 66.7 MHz
Bus Speed 66.7 MHz
L1 Data Cache 16 KBytes, 4-way set associative, 32 Bytes line size
L1 Instruction Cache 16 KBytes, 4-way set associative, 32 Bytes line size
L2 Cache 512 KBytes, 4-way set associative, 32 Bytes line size
L2 Latency 0
L2 Speed 133.3 MHz (1/2)
L2 Location On Cartridge
L2 ECC Check enabled
L2 Data Prefetch Logic no
L2 Bus Width 64 bits
Mainboard and chipset
Motherboard manufacturer Intel Corporation
Motherboard model AL440LX, AA681533-401
BIOS vendor Intel Corp.
BIOS revision 4A4LL0X0.10A.0027.P09
BIOS release date 03/26/98
Chipset Intel i440LX rev. 3
Southbridge Intel 82371 (PIIX4) rev. 3
AGP Status enabled, rev. 1.0
AGP Data Transfert Rate 1x
AGP Side Band Addressing supported, not enabled
AGP Aperture Size 64 MBytes
Pentium 4 2,6 Ghz
Ram = 512 MB
Video card = ATI 9800 pro 128 mb

You haven't updated the BIOS since 1998. What do you mean by a "hacked" BIOS & what do you think you're gonna accomplish?
Since you know the make/model, why didn't you just search for the BIOS on google yourself? Here's one from 2002. Use DRIVERS for the login ID, & ALL for the password:
http://www.bios-drivers.com/drivers/81/81563.htm
http://support.intel.com/support/motherboards/desktop/AL440LX/
Asus A7N8X-X
2500+ Sempron @ 2100mhz
10.5 x 200mhz @ 1.80v
512mb PC3200
Ti4200/8X 128mb
WDC 60GB

ok here is my plan......... i want to overclock my processor but my bios is LOCKED! SECURED! i cant change my clock speed/ FSB settings and someone told me i will be able to change them when i download a hacked bios for my comp!
So thats what i need
Pentium 4 2,6 Ghz
Ram = 512 MB
Video card = ATI 9800 pro 128 mb

When you say the BIOS is locked, do you mean it's password protected? If so, just pull the plug, then remove the CMOS battery for a minute...replace the battery, plug it in & fire it up...all the settings (including date & time) will have reverted to their defaults & the BIOS will now be accessable. But I don't think it'll help. There are software programs that will allow you to overclock though - you're not gonna accomplish it with the BIOS. Read this:
http://home.earthlink.net/~billselk/al440lx/overclocking.html
Asus A7N8X-X
2500+ Sempron @ 2100mhz
10.5 x 200mhz @ 1.80v
512mb PC3200
Ti4200/8X 128mb
WDC 60GB

Wow That site is Awesome thank you very much!
It tells me to:There are some people who say that you can defeat this lock by covering up one of the pins on the CPU with a piece of tape. However, all this has ever succeeded in in my experience is a CPU pin with tape residue on it.
But i never heard of a Cpu pin!
Can you show me a link? then i know what to tape.
So i can make changes finnaly in my Bios!Thanks,
Pentium 4 2,6 Ghz
Ram = 512 MB
Video card = ATI 9800 pro 128 mb

You're not gonna be able to unlock the multiplier, you can only overclock by raising the FSB. If your BIOS doesn't provide FSB adjustments, you'll have to use that software program.
Your current setting is 4 x 66mhz FSB. The PCI speed for your particular setup is 1/2 the FSB, or 33mhz. You do NOT want the PCI speed to exceed 37.5mhz or you'll run into all sorts of problems, so you'll have to limit your FSB to 75mhz. That'll put your CPU speed at 300mhz (4 x 75). That's not a significant speed increase, but at least it's something.
Asus A7N8X-X
2500+ Sempron @ 2100mhz
10.5 x 200mhz @ 1.80v
512mb PC3200
Ti4200/8X 128mb
WDC 60GB

Freestyler you need to slow down buddy. You are not going to get much more performance out of a 266 MHz chip by overclocking it at least not enough to make a difference with today's programs. And if you rush into this you will most likely just fry the CPU.
That being said...
A "pin" is one of the connectors on the CPU that connects to the motherboard. You would have to remove the processor from the motherboard and locate the correct pin in question. Plus, the article above did not mention which pin needed to be covered.
Michael J

Hmm yeah im not that stupid i know i can overclock my cpu to 350 max i think,
Now i downloaded that SOFTFSB program to overclock my cpu, its not overclocked for real, cause when i start my comp it still says 266Mhz in the bios but the cpu speed will change automatically when windows i started to 320Mhz its because i enabled the FSB to start when windows start and the FSB was set from 66Mhz to 80 Mhz.
I feel much better now lol.
but it would be much cooler when i can over clock it in the bios :( i readed some forums about overclocking and unlocked their bios about the Motherboard model AL440LX So it is after all posible... so i registerd in that forum and tried to send him a mail but his mail is not showed/protected so this is so not cool.
I must know how to unlock And yeah Wich CPU pin shall i tape? hmmmThanks,
Pentium 4 2,6 Ghz
Ram = 512 MB
Video card = ATI 9800 pro 128 mb

Btw I downloaded an update for my bios called:
BIOS 4A4LL0x0.86A.0031.P14 [ALBIOS14.EXE] (520KB)
Is it possible that when i install that bios i do can change my Clock/FSB speed?
THanks
Pentium 4 2,6 Ghz
Ram = 512 MB
Video card = ATI 9800 pro 128 mb

![]() |
![]() |
![]() |

This post is quite old and has been locked from receiving new replies. Please create a new posting instead.
| Ads by Google |