Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Celeron 1.1 Tualatin
Name: chog1010 Date: January 9, 2003 at 14:58:11 Pacific OS: Windows XP Pro CPU/Ram: celeron 400/256
Comment:
I've got a celeron tualatin 1.1 which runs at 1.475v, a Gigabyte 6vxc7-4x which has auto voltage detect and won't recognise the CPU. Any way I can make these two work together?
Name: overclocker Date: January 9, 2003 at 15:13:35 Pacific
Reply:
Is the socket the same. If it is, then try and see if it works or not.
0
Response Number 2
Name: Buster Date: January 10, 2003 at 02:00:12 Pacific
Reply:
Dear Friend Try a Manual setting of your core voltage, if possible.
Your Tualatin should work anywhere a Pentium 3 CPU operates, Just make sure you clock the system at 100mHz which means a multiplier of 10 or better to hit 1.1 gHz.
Not all MoBos do this, Good Luck
0
Response Number 3
Name: chog1010 Date: January 10, 2003 at 14:33:11 Pacific
Reply:
Guys - I've tried it and it dont work. I've tried removing the cmos battery, reseating memory, graphics cards etc. Nuthin. My mobo wont allow seting voltages manually hence my problem.
Summary: Which processor would be better. A PIII/600 (fastest my MB will accept) or a Celeron 1.4Ghz in a Powerleap Adapter. The Celeron is the "Tualatin" core 256 cache 100Mhz FSB and the PIII/600 is a standa...
Summary: thats right, 1 ghz p3 is faster than the 1.5 celeron. The celeron is the older willamette based, which faced a lot of criticism for this very fact, that the p3 based celeron could beat it... the 1.2 (...
Summary: celerons 1.1 ghz - 1.4 ghz won't work on your motherboard without an adapter as they are the new tualatin based models (FCPGA2), even though they fit in the socket. You can either install a coppermine...
0 
Overclockin AMD K6-2 350M...
