AMD Sempron 2400+ O/c
|
Original Message
|
Name: jamie123456
Date: December 14, 2005 at 14:27:25 Pacific
Subject: AMD Sempron 2400+ O/cOS: WIN XP SP2CPU/Ram: amd athlon 3200 512Mb |
Comment: Hi, i hav an AMD Sempron 2400+ thourabred B- its overclocked to 1.89GHz from the stock 1.6 (now 10X188) my mobo is MSI KT4AV and i have 512 MB PC2700 DDR SDRAM (2.5-3-3-7 @ 166 MHz)What would be the best setting for highest O/c temp is not a problem, have watercooling on hand. Jimbo
Report Offensive Message For Removal
|
|
Response Number 1
|
Name: jam
Date: December 14, 2005 at 17:27:42 Pacific
Subject: AMD Sempron 2400+ O/c |
Reply: (edit)I thought we had this straight in your last post? You're losing performance by running your RAM at a slower speed than the CPU. With your current setup @ 188/166, your RAM is bottlenecking the system. Lower the FSB to a speed that the RAM is also capable of running at, even if it means 180/180 & dropping your CPU speed to 1.80GHz This space for rent
 Report Offensive Follow Up For Removal
|
|
Response Number 2
|
Name: Mattwizz3 (by mattwizz3)
Date: December 15, 2005 at 16:51:49 Pacific
Subject: AMD Sempron 2400+ O/c |
Reply: (edit)I'm not sure you would get much more out of it anyway, I got my Sempron 2600+ to 2.3GHz and my ram was at 210Mhz. It was running stable but only if I took my ram timings to 3,4,4,8 an uped my Vcore. I didnt notice any speed difference and I didnt think that the extra 100Mhz was worth the heat and crappier ram timings. So I'm still running at 2.2Ghz at stock voltage and 2.5,3,3,8. I think with that system the best way to get better performance is by getting another 512Mb of ram or replace the current ram with PC3200 and you might get 200MHz FSB from that processor. Mattwizz3 : ) A7N8X-E Deluxe
Sempron 2600+ OC 2.2GHz
1Gb DDR400 Dual Channel
Maxtor SATA 200Gb/7200/8m
WDC IDE 80Gb/7200/8m
Damn Microsoft...
DIE STEAM DIE!
Report Offensive Follow Up For Removal
|
Use following form to reply to current message:
