Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
Abit BE6 Mobo RAM problem
Name: whiteshadow Date: July 14, 2002 at 23:56:30 Pacific
Comment:
Hi All,
I have an Abit BE6 motherboard with a Celeron 300a clocked at 450 in it. I have 3 sticks of RAM, 2x64Mb and 1x32Mb, they all previously worked in that board until the weekend when i was bored and pulled the PC apart. All 3 sticks of RAM work in DIMM1, none of them work in DIMMS 2 or 3, is there some BIOS setting which allows all three to work or something else?
Don't know about that, but I just upgraded a friend's computer from a BE6 to a Tyan Trinity K7 (slot A athlon). That one had a single 256mb sdram stick and a 450 mhz pentium 2 in it. She wound up with a 900 Mhz K7 athlon and 768 MB ram. She has the old hardware too.
Summary: Hi gang, I have a computer made by a local shop (from a town where I no longer live) that runs on a Abit BE6 motherboard, with a PIII 500/100 CPU and 384Mb Ram. I don't know much about upgrading CPU...
Summary: I have an Abit BE6-II motherboard with 128ram and a PIII 450 processor. My problem is processor temp which right now runs at 74-78 C. That's way too much, isn't it? The processor is SLOT-1 type and I ...
Summary: I have these specs: Athlon XP2400 T-Bred ABIT NF7 Mobo V1.1 TWINX 3200C2PT 2x512MB CORSAIR RAM Geforce TI4200 Currently my FSB is set to 166x12. I was wondering if I set my FSB to 200x10 is this possi...
0 
I think my hard drive is ...
