Computer Problems? Computing.Net has over 1,000,000 posts about all things technology related! Over 90% answered within 24 hours! Click here to start participating now! Also, be sure to check out the New User Guide.
No USB
Name: Wraith Date: May 18, 2002 at 06:39:41 Pacific
Comment:
I have WinXP on a NTFS partition. I installed BeOS to a FAT32 partition on my D Drive. After running BeOS I used the installer to load BeOS to another FAT32 partition on the D drive and then unistalled BeOS from WinXP. The problem is that I have no USB now under BE. I've updated to 5.03 but still now USB. My usb mouse, printer, and web cam are dead in the water. Can anyone help me?
Name: jefro Date: May 18, 2002 at 14:00:20 Pacific
Reply:
uhci is supported but not ohci controllers. Some uhci usb controllers don't even work. I am not sure if anyone is working on a driver for ohci. Check which controller you have. I think BeOS Devices panel will even tell you it is found and tell you what it is. (not sure about that though)
0
Response Number 2
Name: jefro Date: May 21, 2002 at 15:15:57 Pacific
Reply:
Sorry, just found out that dano has ohci support. Don't know if it will port over to 5.0
Summary: Um... No USB was not a "standard", it was still fluctuating. Apple didn't support USB until the iMac, so none of the original G3's (AFAIK) had it, let alone the pre g3's supported by BeOS. The thing ...
Summary: Ethernet - no USB in this city! The NIC card works I tried static settings and the connection worked for 5 seconds Don't know how to ping in BeOS The IP lasts very long some have reported years Are yo...
0 
